Hitachi DH 24PD2 Technical Data And Service Manual page 12

F. Drilling hole (rotation only)
Drill chuck (13VLD-D)
Chuck adapter (D) (for SDS-plus shank type)
13 mm (1/2") Drill chuck 13VLD-D (with chuck wrench)
G. Drilling screw (rotation only)
Plus driver bit [overall length: 25 mm] (for cross-recessed head screw)
Bit No.
Screw size
Bit No.
3 --- 5 mm
No. 2
6 --- 8 mm
No. 3
H. Grease for electric impact drill
Containing 500 g (1.1 lbs.): Code No. 980927
Containing 30 g (0.07 lbs.): Code No. 981840
70 g (0.15 lbs.): Code No. 308471
For drilling holes in steel and wood
• • •
Chuck adapter (D)
(SDS-plus shank)
(NOTE)
The 13VLD-D drill chuck and chuck adapter (D) cannot be used for reverse
rotation. If reverse rotation is to be used for loosening screws, use the plus bit
(bit No. 2), described below, by attaching it directly to chuck adapter (D).
Part name
Chuck adapter (D)
(SDS-plus shank)
Code No.
971511Z
971512Z
--- 9 ---
Code No.
303624
321813