Hitachi DH 24PD2 Technical Data And Service Manual page 11

E. Drilling and driving screw (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
13 mm (1/2") Drill chuck
Special screw
(13VLRB-D type)
(Note)
If the tool is to be used for loosening screws, open the three jaws of the drill chuck and securely fix the drill chuck
to chuck adapter (G) with the special screw (a left-hand threaded M6 screw) when mounting the drill chuck onto
chuck adapter (G).
a.
Chuck adapter (G) for SDS-plus shank system
b.
13 mm (1/2") Drill chuck 13VLRB-D (with chuck wrench)
c.
Special screw (M6 left-hand threaded)
(1) Cross-recessed head (Phillips) bit
[Overall length: 70 mm]
(For use with cross-recessed head (Phillips) screw)
Stamped bit No.
Bit No. Code No.
Applicable screw dia. (mm)
955654
No. 2
No. 3 955655
Chuck wrench
Part name
4 --- 5
6 --- 8
Chuck adapter (G)
(SDS-plus shank)
Code No.
303623
321814
981122
(2) Slotted-head (minus) bit
[Overall length: 50 mm]
(For use with slotted-head (minus) screw)
Tip thickness
Bit tip thickness Code No.
0.8
1
--- 8 ---
Applicable screw dia. (mm)
955658
5 --- 6
955673
4