Frame
Lint Frame
Delicate Fabric Frame
Upholstery Frame
FILLING THE WATER TANK
1.
Place the steamer on its base on a stable surface.
2.
Hold the handle to stabilize and pull out the removable
water tank with the other hand. (C)
3.
Gently pull out the rubber water tank cover at the top
of the tank. (D)
Tip: Using distilled, purified, or filtered water is highly
recommended and will reduce mineral buildup. Do not use
oils, perfumes, or scented additives.
4.
Using a clean measuring cup, pour water into opening
until water reaches the "MAX" level mark on the top
of the tank. (E) Do not overfill. Close the rubber cover
securely.
5.
Dry off any excess water from the tank. Push water
tank back into the steamer base; click into place.
6.
To refill at any time during use, turn steamer off by
pressing the power button until the blue indicator
light is off, unplug from outlet, and follow the above
procedure.
Tip: After refilling, allow to reheat for 45 seconds and then prime pump by
holding steam trigger until steam forms.
Usage
Garment Care Label: For any garments that call
for medium to high heat and allow for use of
steam.
Tip: Frame helps remove lint, hair, and animal fur.
Garment Care Label: For any garments that call
for low heat and allow for use of steam.
Tip: For items with embellishment, turn the gar-
ment inside out to better remove wrinkles and
avoid damage to sensitive areas.
Upholstered Fabrics: Great for deodorizing and
refreshing bedding, mattresses, curtains, plush
toys, furniture, and hard surfaces (such as count-
ers or desks that are not heat sensitive).
Tip: Always test for colorfastness and heat sensi-
tivity on an inconspicuous area.
6
C
D
E