Advertisement
Setup Pane
[Setup] pane can be displayed in the main dialog window by clicking the [Setup] tab. This pane
controls enabling/disabling to show each indicator on the [Link Info] pane.
(3)
(5)
The following descriptions are about each item on the pane.
(1)
Selecting [ON] enables the corresponding indicator on the Link Info pane.
All are [ON] as the default.
(2)
Selecting [OFF] disables the corresponding indicator on the Link Info pane.
(3)
[Apply] button activates every setting above.
(4)
[Reset] button enables and activates all settings above.
(5)
[OK] button activates every setting above and close the dialog.
(6)
[Cancel] button closes the dialog without activation of the settings.
Kyocera Corporation
iBurst Terminal USB Model (UTU) Manual
S40T-EE005 Rev.1.00 Oct.28.2008
- 34 -
(1)
(2)
(4)
(6)
Advertisement
