Advertisement
Installation for
Installation
for Windows Vista/XP
Windows Vista/XP
Installation
Installation
for
for
Windows Vista/XP
Windows Vista/XP
This section shows the procedure to install iBurst software on your PC for utilizing iBurst
Terminal. The procedure shall be done once before using it.
ATTENTION:
If you have installed an old version of iBurst software or you updated Windows
version, you have to uninstall the existing iBurst software first. Otherwise
performance and/or throughput through iBurst Terminal may be restricted.
NOTE: All screen copies in this section are examples on Windows Vista.
1. Make sure to remove the iBurst Terminal from your PC.
ATTENTION: Don
Don' ' ' ' t t t t plug
Don
Don
2. Turn your PC on.
3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or
execute the appropriate installation software.
4. On Windows Vista, click [Allow] to proceed installing when Windows prompts [User Account
Control].
Kyocera Corporation
plug the iBurst Terminal
the iBurst Terminal into
plug
plug
the iBurst Terminal
the iBurst Terminal
iBurst Terminal USB Model (UTU) Manual
into your PC until completion of installation.
your PC until completion of installation.
into
into
your PC until completion of installation.
your PC until completion of installation.
S40T-EE005 Rev.1.00 Oct.28.2008
- 10 -
Advertisement
