Advertisement
iBurst Terminal USB Model (UTU) Manual
To connect
To connect
To connect
To connect
This section shows the procedure to connect to the Internet through iBurst. You have to do this
every time before starting Internet accessing.
1. Click [Start] button, [Connect To] and <Connection name you created>.
NOTE: The connection name "iBurst" in the picture below is an example.
2. When a dial-up connection dialog is popped up, fill items and click [Connect].
3. When the connection establishment process is complete, a message indicating completion of the
connection will appear at the task tray as shown below.
iBurst
Kyocera Corporation
S40T-EE005 Rev.1.00 Oct.28.2008
- 26 -
Advertisement
