Philips IT910 User Manual page 10

Step 3. Place Batteries In The Remote Control
1. Remove the cover from the battery compartment.
2. Insert two batteries into the battery compartment, matching the + and – end of
each battery.
3. Replace the cover.
Step 4. Plug In And Turn On The System
1. Plug the power cord into a wall outlet.
2. Wait for a few seconds.
3. Turn on the your TV or monitor.
4. To turn on your HD receiver, press the HD STB button on the top of remote control.
5. Press POWER button on the remote control or the front panel.
Philips HD receiver User Guide
9