Page 1
ROBOT LADYBUG KIT C-9812 TOOLS YOU NEED The Ladybug Robot moves with its six legs and makes use of infrared emitting diodes as its “eyes” to avoid obstacles along its path. Ladybug automatically makes a left turn the moment it detects an object in its path. It continues to move forward after that if theres is no shadow in front of the sensor.
Page 2
C-9812 MECHANICAL PART LIST PCB ASSEMBLY www.cebekit.com info@cebekit.com...
Page 3
C-9812 Step 1 : Suggest you start from the low-key components first such as the resistors. Step 2 : Mount and soldering the components such as Ceramic capacitor, Electrolytic capacitor, Transistor, Diode. Step 3 : Mount and soldering the components such as IC socket, Housing, Slide switch, Variable resistor, Pin .
Page 6
C-9812 How it works 1 - Switch power to "ON". 2 - Put Ladybug Robot on the ground and see if it goes forward smoothly. 3 - When unit detects obstacle it will turn left. Remove the obstacle, it will go forward continuously.
Page 7
C-9812 CIRCUIT DIAGRAM NOTE. This kit is recommended for children aged 10 years, always escorted by an adult www.cebekit.com info@cebekit.com...