Adding Products - Velux INTEGRA KLR 200 Quick Manual

Adding products

Adding control pad
If you want to operate your VELUX products with more than one control
pad, the contents in the control pad in use can be copied to other control
pads.
Note: If you have adjusted the standard programs or made your own
programs, these are not copied to the other control pads.
The instructions below show how to copy between two control pads of
the same type. If you have other controls, you must follow the instruc-
tions for these.
A
The control pad, which is to
send a copy, is called .
A
16 VELUX
B
New control pad, which is to
receive a copy, is called .
B
English
Adding products
Adding control pad
1
B
2
A
3
A
4
A
English
Start with control pad , which is
B
to receive a copy.
Go to section Initial set-up and
carry out steps 1-3.
Tap "Receive copy".
Note: Do not tap
until step 5.
Carry out steps 2-4 with control
pad which is to send a copy.
A
Tap .
Tap "New product".
Tap "Copy control pad".
VELUX 17