Velux INTEGRA KLR 200 Quick Manual page 10

Adding products
Adding control pad
5
A
B
6
B
18 VELUX
Tap in control pad A followed
by in control pad .
B
If the display shows "No products
found", tap "Search again" to try
again.
Tap "OK" in control pad B .
English
All the rest
Resetting control pad
If you want to delete all registered products and personal settings and
start afresh, you can reset the control pad to the initial factory settings.
Note: If you have one control pad only, all the products must be reset,
before they can be registered in the control pad again (see section If initial
set-up fails). If you have a second control pad, you can copy this to your
reset control pad instead (see section Adding control pad).
1
2
3
1
2
English
Remove the battery lid by pressing
the button with a screw driver as
shown in the illustration 1 2 .
,
Press RESET button on the back
of the control pad with a pointed
object for at least 5 seconds 3 .
Tap "Yes" to confirm that you want
to reset the control pad.
The control pad is now reset. To use
the control pad again, see section
Initial set-up.
VELUX 19