Install The Handset - Philips SE360 User Manual

Install the handset

Caution
Use only the supplied batteries.
different brands or types of batteries.
Note
use.
Warning
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
a The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
b Place the handset on the base station to
power up.
Note
If the handset becomes warm when the
batteries are being charged, it is normal.
Checking the battery level
The battery icon displays the current battery
level.
The battery is full.
The battery is empty.
Charge it.
The handsets turn off if the battery is empty. If
you are on the phone, you hear warning tones
when the battery is almost empty. The call gets
disconnected after the warning.
Set the date and time
1
Press menu.
2
Select [CLOCK & ALARM] > [SET
DATE/TIME], then press [OK] to
3
Press the numeric buttons to enter the
date, then press [OK]
On the handset, the time set menu is
»
displayed.
4
Press the numeric buttons to enter the
time.
If the time is in 12-hour format, press
/
Ph.Book
call ID
[PM].
5
Press [OK]
to select [AM] or
EN
15