Connect The Charger - Philips SE360 User Manual

Hide thumbs Also See for SE360:
Table of Contents

Advertisement

Connect the charger

Note
The instructions for charger connection below
is only available for multi-pack models.
1
Connect the output plug of the power
socket to the bottom of the charger.
2
Connect the power socket to a standard
wall outlet.
Wallmount the base station
Warning
You must follow the instructions below to
wallmount the base station.
1
Press the two latches on the top of the
bracket.
The bracket from the back of the base
»
station is removed.
14
EN
2
Turn the bracket around.
3
Re-insert the bracket into the back of the
base station.
4
Insert screws (not included) into the wall.
5
Align the mounting holes on the back of the
base station with the screws on the wall.
6
Slide the base station down into place.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se365

Table of Contents