Advertisement
>>
It is mandatory to exit the Module Navigation
at the end of this procedure. Failure to exit the
Module Navigation will drain vehicle battery.
To exit the Module Navigation at any time:
Follow STEP 13.
>>
Module must be programmed to the vehicle.
>>
Use the Module Navigation Chart on the next
page.
01
Set ignition to OFF position.
OFF
OFF
ACC
ON START
ENGINE
START
STOP
02
TO ACCESS THE MENUS: Press and hold
programming button until LED 1 turns solid
GREEN.
03
IN THE MENUS: Press the programming
button as many times as the menu number
[X]
indicates. LED 1 will fl ash GREEN an equal
amount of times continuously.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2016
MODULE NAVIGATION PROCEDURE - 1 OF 1
04
TO ACCESS THE OPTIONS: Press and hold
programming button until LED 1 turns solid
RED.
05
IN THE OPTIONS: Press the programming
button as many times as the option number
[Y]
indicates. LED 1 will fl ash RED an equal
amount of times continuously.
06
TO ACCESS THE SETTINGS: Press and hold
programming button until LED 1 turns solid
GREEN.
07
LED 1 will flash GREEN as many times as
the current (or default) setting number,
[Z]
continuously.
08
IN THE SETTINGS: Press the programming
[Z]
button as many times as necessary to access
your setting. LED 1 will fl ash GREEN an equal
amount of times continuously.
09
To return to the MENUS: exit the Module
Navigation and redo the Module Navigation
Procedure.
OEM-AL(RS)-TL6-[OL-MDB-ALL]-EN
10
To save and return to the OPTIONS: Press and
hold programming button until LED 1 turns
solid RED.
11
LED 1 will fl ash RED as many times as the
current option number continuously.
[Y]
12
Configure every other setting and proceed to
step 13.
13
MANDATORY: EXIT MODULE NAVIGATION.
Press and hold programming button for 7
seconds. LED 1 will fl ash RED rapidly. Release
programming button. LED 1 will turn OFF.
14
Module navigation completed.
>>
Failure to exit the Module Navigation will drain
vehicle battery.
PAGE 26 OF 31
• 20160317
DOC.: #27743
Advertisement
