Advertisement
CHAPTER 5: POP UP CONTROL PANEL OPERATION
Level is active only when the AD Type is Interrupt. Choices are
2, 3, 4,5,7,10,11,
and
1 5 .
Units selects AD
Codes
or Volts.
Start
selects the Start Channel for the A/D conversion. The Start Channel may range from 0-7;
however, it can be no greater than the number specified for the Stop Channel.
Stop selects the Stop Channel for the A/D conversion.
Gain Selects the gain for the A/D conversion. Choices are
1, 1 0 ,
and
100.
Channel
-
A/D Data
The monitor panel for the A/D conversion(s) appears as follows:
Only the channels specified by Start and Stop (under Setup)
will
show results. These results update
with each conversion cycle.
5.5 THE DATA LOGGING PANEL
The Data Logging Panel appears as follows:
Data Logging Menu
This menu appears along the top of the Logging Panel and contains 3 options as
follows:
This option toggles between the keyboard and mouse control of the Control Panel.
This option starts the Logging function and StopLog is displayed. If StopLog is
selected then StartLog is displayed and logging is stopped.
Displays the Main Control Panel Screen.
Keyboard
StartLog
Main
...
5 - 3
Advertisement
