Video Sharing Settings; Share Live Video Or Video Clips - Nokia E52 User Manual

Hide thumbs Also See for E52:
Table of Contents

Advertisement

• Ensure that your device is set up for person-to-person
connections.
• Ensure you have an active 3G connection and are within
3G network coverage. If you move outside the 3G
network during a video sharing session, the sharing
stops while your voice call continues.
• Ensure that both the sender and recipient are
registered to the 3G network. If you invite someone to
a sharing session and the recipient's device is not
within 3G network coverage, does not have video
sharing installed, or person-to-person connections set
up, the recipient does not receive invitations. You
receive an error message that indicates that the
recipient cannot accept the invitation.

Video sharing settings

To adjust video sharing settings, select
panel
Settings
>
To set up video sharing, you need person-to-person and
UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a session
initiation protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use video sharing. Contact your service provider for the SIP
profile settings, and save them to your device. Your service
provider may send you the settings or give you a list of the
needed parameters.
To add a SIP address to a contact:
1. Select
Menu
> Contacts.
46
2. Select the contact, or create a new contact.
Menu
and
Connection
Video
>
2009-11-09 15:1:46
3. Select
Options
4. Select
Options
5. Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
If you do not know the SIP address for the contact, you
can use the phone number of the recipient, including
the country code, to share video (if supported by the
network service provider).
UMTS connection settings
To set up your UMTS connection:
• Contact your service provider to establish an agreement
for you to use the UMTS network.
• Ensure that the UMTS access point connection settings
for your device are configured properly. For more
information about the settings, contact your service
Ctrl.
>
provider.
sharing.

Share live video or video clips

During an active voice call, select
video.
1. To share live video during the call, select
To share a video clip, select
want to share.
You may need to convert the video clip into a suitable
format to be able to share it. If your device notifies you
that the video clip must be converted, select OK. Your
device must have a video editor for the conversion to
work.
> Edit.
Add detail
Share
video.
>
>
Options
>
Live
Video clip
and the clip you
Share
video.

Advertisement

Table of Contents
loading

Table of Contents