Wlan Security Settings; Wlan Settings - Nokia E52 User Manual

device to a packet data network only when an application
or action attempts to establish a packet data connection.
This setting affects all access points for packet data
connections. To use the device as a packet data modem
for your computer, select
access point name provided by your service provider. To
use a high-speed data connection, select
packet access > Enabled.

WLAN settings

SelectMenu Ctrl. panel
>
Wireless LAN.
To have an indicator displayed when there is a wireless
LAN (WLAN) available in your current location, select
WLAN availability
To select the interval for your device to scan for available
WLANs, and to update the indicator, select
networks. This setting is not available unless you select
Show WLAN availability
To set the device to test the internet capability of the
selected WLAN automatically, to ask for permission every
time, or to never perform the connectivity test, select
Internet connectivity test
every time, or Never
automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed
successfully, the access point is saved to internet
destinations.
To check the unique media access control (MAC) address
that identifies your device, enter *#62209526# in the
100
home screen. The MAC address is displayed.
Access point, and enter the
High speed
Settings and Connection
>
> Yes.
Scan for
> Yes.
Run automatically,
>
run. If you select Run
2009-11-09 15:1:46

WLAN security settings

Select Menu
>
Destinations
on the display.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with .
To enter the settings for the selected security mode, select
WLAN security
>
Session initiation protocol
(SIP) settings
Show
Select Menu
>
SIP settings.
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings for
these sessions. The SIP profile used by default for a
communication session is underlined.
Ask
To create a SIP profile, select
profile Use default profile
>
To select the SIP profile you want to use by default for
communication sessions, select
profile.
Ctrl. panel Settings and
>
Access point, and follow the instructions
>
settings.
Ctrl. panel Settings and
>
Options
>
or Use existing
Options
Connection
>
Connection
>
New SIP
profile.
Default
>