Mitsubishi Electric PAR-CT01MAA-SB Instruction Book page 23

Main menu Setting items
Energy Energy
saving saving
Initial Basic
setting setting
Display
setting
Touch
panel
Service Initialize remote
controller
Remote controller
information
Maintenance Error information
Filter information
Schedule Set the start/stop times to operate the units in the
energy-save mode for each day of the week, and set the
energy-saving rate.
• Up to four energy-save operation patterns can be set for
each day.
• Time can be set in 5-minute increments.
• Energy-saving rate can be set to a value from 0% and 50 to
90% in 10% increments.
* Clock setting is required.
Clock Use to set the current time.
Daylight Sets the daylight saving time.
saving
time
Main Use to switch between "Full" and "Basic" modes for the
display Status display and the Main display.
• The default setting is "Full."
Brightness Use to adjust screen brightness.
Language Use to select the desired language.
selection
Design Use to change the color of the Status display and Main
display.
Touch Sets the calibration settings for the touch panel.
panel
calibration
Touch Temporarily makes the touch panel unresponsive to
panel touch to allow for cleaning.
cleaning
Use to initialize the remote controller to the factory
shipment status.
Use to display the remote controller model name,
software version, and serial number.
Use to check error information when an error occurs.
• Error code, error source, refrigerant address, unit model,
manufacturing number, contact information (dealer's phone
number) can be displayed.
* The unit model, manufacturing number, and contact
information need to be registered in advance to be
displayed.
Use to check the filter status.
• The filter sign can be reset.
Setting details Page
51
54
56
58
61
62
64
66
68
70
72
74
78
23