Mitsubishi Electric PAR-CT01MAA-SB Instruction Book page 19

2
Preset
temperature
for cooling
Preset
temperature
for heating
Settable preset temperature range
Operation mode
Cool/Dry
Heat
Auto (Single set point)
Auto (Dual set points)
Fan/Ventilation
The settable temperature range varies with the model of indoor units.
Press the
temperature, and press the
•
Refer to the table below for the settable temperature
range for different operation modes.
•
The preset temperature settings for cooling and heating in
the Auto (dual set point) mode are also used by the Cool/
Dry and Heat modes.
•
The preset temperatures for cooling and heating in the
Auto (dual set point) mode must meet the conditions
below:
•
Preset cooling temperature is higher than preset heating temperature.
•
The minimum temperature difference requirement between cooling and
heating preset temperatures (varies with the models of indoor units
connected) is met.
•
If preset temperatures are set in a way that does not meet the minimum
temperature difference requirement, both preset temperatures will
automatically be changed within the allowable setting ranges.
Preset temperature range
19 ~ 30 ºC (67 ~ 87 ºF)
17 ~ 28 ºC (63 ~ 83 ºF)
19 ~ 28 ºC (67 ~ 83 ºF)
[C ool]
Preset temperature range for the Cool mode
[H eat]
Preset temperature range for the Heat mode
Not settable
▼
button to decrease the selected
▲
button to increase.
19