Advertisement
e-Stat
The
control a single HVAC system. Do not attempt to
control more than one HVAC unit with an
Both Remote Temperature and Supply Air sensors
MUST BE installed for the
All wiring should be a minimum of #18AWG. Shielding
is not required.
Cat-5/5e
NETWORK
CABLE
Wiring Layout
is used as a stand-alone thermostat to
TYPICAL
ROOFTOP
UNIT
SUPPLY AIR SENSOR
MOUNT ON DISCHARGE AIR DUCT WITH
PROBE IN DISCHARGE AIR STREAM
2 WIRE #18AWG
MOUNT IN SPACE TO BE CONTROLLED
e-Stat
to function properly.
SUPPLY AIR DUCT
REMOTE TEMPERATURE AND
HUMIDITY SENSOR
8
®
e-Stat
Advertisement
