Advertisement
Ductwork
Your existing POS
computer and/or
network connection
1. Typically, the e-Stat should be located within a
few feet of the network equipment such as the
network switch. It may be located farther. The
maximum Cat 5 cable run is 328 ft
(100 meters).
2. Mount the Remote Room Sensor on a wall or
column in the conditioned space, away from
windows, doors and supply air ducts. (Refer to
page 9 for more instructions.)
3. Mount the Supply Air Sensor in the supply air
duct as close to the HVAC unit as possible.
(Refer to page 10 for more instructions.)
Note: You must use the remote temperature
sensor supplied. The e-Stat does NOT contain
an onboard temperature sensor.
e-Stat Typical Wiring Configuration
Roof Top Unit #1
Remote supply sensor is
located in supply ductwork
Supply
2-conductor
#18 low voltage
cable
e-stat
Hub
Cat 5
cable
Retail or restaurant
Existing
8-conductor
#18 low voltage
cable
Remote room sensor
2-conductor
#18 low voltage
cable
interior area
1
Return
Ductwork
Advertisement
