Download Print this page

Lightstat ecoStat Reference

Download this manual

ecoStat Reference

Cooling Setpoint

Cooling

Active Indicator.

System Mode

Cooling Mode/

Temperature Down

Button

System Power/

Fan Mode

Button

Ambient temperature

OFF

Fan Active Indicator

ecoStat Installation Manual TPUB00045 Rev. A 03052018

HEAT

Light Sensor

Temperature

Unit

Battery Indicator

(when applicable)

Setback Indicator

Override Timer

Relative Humidity

Heat Setpoint

Heating Active

Indicator

Fan Mode

Page 1 Indicator System Mode Fan Mode Cooling Mode/ Temperature Down Button Fan Active Indicator System Power/ Fan Mode Button © Lightstat, Inc., 22 W. West Hill Rd., Barkhamsted, CT 06063 Tel:800.292.2444 Fax: 860.738.4123 www.lightstat.com ecoStat Installation Manual TPUB00045 Rev. A 03052018...
Page 2 Long Press Long Press Enables Press together Heating and Cooling to access light with Auto Changeover threshold settings © Lightstat, Inc., 22 W. West Hill Rd., Barkhamsted, CT 06063 Tel:800.292.2444 Fax: 860.738.4123 www.lightstat.com ecoStat Installation Manual TPUB00045 Rev. A 03052018...
Page 3 (Cool Stage 1) / Y (Heat Pump) (Cool Stage 2) © Lightstat, Inc., 22 W. West Hill Rd., Barkhamsted, CT 06063 Tel:800.292.2444 Fax: 860.738.4123 www.lightstat.com ecoStat Installation Manual TPUB00045 Rev. A 03052018...
Page 4 UNITS The ecoStat’s housing consists of three parts to allow for easy installation. The back plate is mounted to the wall first and all the external wiring is connected into the built in terminal block. Once this plate is firmly mounted and wired, the cover plate and internal plastic guard attached will lock onto the back plate mating the connections between the thermostat and the terminal block.