Table of Contents
Advertisement
3.
QUICKSTART GUIDE
3.1.
Device component overview
USB
connector
Charge LED
3.2.
Hardware
Prior to use, connect the USB cable. You can run the PC Software Recognoil.
After that, if battery voltage is O.K. you will be able to choose a detection mode.
After the detector activation, choosing a mode and exposition trigger press, the surface is
irradiated and the results are being collected. Please read more information in the
Software chapter.
3.3.
Software
Minimum system requirements:
• Intel Atom Z2760, 1 GB RAM
Trigger switch
Img. 1.: Component overview
Recognoil – User's Manual
Software version 2.2.1_2015-02-21
Removable
silicon sleeve
7
-
-
Advertisement
Table of Contents
