Notes On Device Operation - TechTest RECOGNOIL User Manual

Oil layer detector
Table of Contents

Advertisement

3.8.1. Charging walkthrough
The new 2014 hardware version now contains an USB Lithium-Ion battery charger.
The device is in the charging mode when:
Connected to the computer while the Recognoil software is not opened
Connected to the USB wall adapter
The full charge takes up to 20 hours of charging.
It is generally recommended to fully charge the battery every two months, without the
need of previous discharge (unlike the older NiMH battery types).
The device contains Lithium-Ion battery pack.
Correct disposal of this product. This symbol indicates that this product should not
be disposed of with your household waste, according to the WEEE Directive
(2002/96/EC) and your national law. This product should be handed over to an
authorized collection site for recycling waste electrical and electronic equipment
(EEE). Improper handling of this type of waste could have a possible negative
impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE. At the same time, your
cooperation in the correct disposal of this product will contribute to the effective
usage of natural resources.
3.9.

Notes on device operation

In case of the computer had entered the standby mode, it is recommended to re-plug the
USB cable and restart the Recognoil software.
The software is under constant development. Please excuse any runtime errors you may
encounter. When this happens, please restart the software. If the problem persists, please
contact our technical support at: http://www.techtest.eu/support
More information can be found at http://www.techtest.eu/
It is possible to contact us directly at info@techtest.cz
Recognoil – User's Manual
Software version 2.2.1_2015-02-21
19
-
-

Advertisement

Table of Contents
loading

Table of Contents