Electrical Safety - TechTest RECOGNOIL User Manual

Oil layer detector
Table of Contents

Advertisement

1.3.

Electrical safety

a) Recognoil device uses only safe voltages, never exceeding 12 Volt DC.
b) The USB charger works with high voltage of 230 Volt AC and is designed to be used only
in indoor environment. It is strictly prohibited to be operated in wet and moist
environment.
c) Please keep all the supplied appliances from rain and moisture. Use only in indoor
environment.
1.4.
Other precautions
Operate and store the device only in dry and clean environment. The device must be
immediately cleaned in case of any contamination. Residual oil and dust contaminations
degrade future measurement. Do not use organic solvents when clearing.
Do not use paper towels for device cleaning. The paper fibers show a great amount of
fluorescence and thus influence the oil detection process.
A proper method for dust cleaning is with a help of dry compressed air. Please use dry
compressed air, preferably pressurized cans for electronics cleaning.
!
Please handle the device with care – it contains sensitive electronic
components. Avoid mechanical drops and shocks.
Operate the device at room temperature higher than 10°C, not exceeding 35°C. Do not
operate after sudden temperature change or in case of condensing moisture.
Please use only certified shielded USB cables, for example from the Belkin manufacturer.
Please do not use cables longer than 3 meters.
Recognoil – User's Manual
Software version 2.2.1_2015-02-21
6
-
-

Advertisement

Table of Contents
loading

Table of Contents