I/O Bit Tests - Keithley PDISO-8 User Manual

I/O Bit Tests

General Information
6-2
1. Start the AIO Panel as follows:
a. In the Start menu, click Programs.
b. Find the DriverLINX ➧ Test Panels folder, under which you
should find the AIO Panel entry.
c. Click on the AIO Panel entry. The Analog I/O Panel should
appear, similar to the example in Figure 6-1. (If you have other
DriverLINX devices installed in addition to the digital
input/output card you are testing, they will also be listed. In that
case, select the desired digital I/O card and the proper device
number before proceeding.)
Figure 6-1. An AIO Panel example
Troubleshooting