Table of Contents
Advertisement
The KE-USBMX20 can also be loaded through the command line by
using the supplied KE-USBMX20LOAD.EXE program. Refer to readme.
txt located under the Command Line Loader folder on the supplied
CD ROM for further details.
Connection to Membrane Female
Appendix B:
Command Line Loader
Accessories
#PH-9-RA
Connection to Discrete Wires
#MTA100-9H-12
The PH-9-RA is a 9 pin male right
angle header that attaches from
the KE-USBMX20 header to a
female membrane switch header.
The MTA100-9H-12 provides 9
individual wires that are attached
to a connector which plugs
directly into the KE-USBMX20
header.
Use this harness to attach to
individual switches or keypads
that do not have a single row
male header for direct plug in to
the KE-USBMX20.
24
Advertisement
Table of Contents
