Table of Contents
Advertisement
Step 3
With the size of the matrix now defined, and the pins selected,
assign the keys to be emulated to each position in the matrix.
To assign keystrokes, click on the desired matrix position. A
diagram of the keyboard will be displayed, as shown below.
Click on the representation of the key to assign it to the matrix
position.
Note the repeat selection box at the bottom in the middle of the
key selection screen. If the key is to send only one keystroke
per activation, leave this box unselected. If the key is to repeat
when held active, select this box before choosing the key.
11
Advertisement
Table of Contents
