Table of Contents
Advertisement
The keystrokes shown for each key are the keys that will be sent
if the FN key is not active when those keys are activated.
To define the alternate keystrokes for each key that will be sent
when the FN key is held, put the cursor on the FN cell in the
matrix. While holding the right mouse button down, click the
left mouse button. This action will toggle between the key sets
that are sent with the FN held on and the FN key off.
Each matrix cell now shows "<FN ON>" to indicate that keys
defined in that position are the keys to be sent when the FN key
on the keypad is held.
When toggling between the FN key on table and the FN key off
table, the "<FN ON>" will appear only on the table with keystrokes
that will be sent when the FN key is held.
To define the keys for each of the positions on this screen, select
each cell and then the keystroke for each just as done previously
for the non-FN altered keystrokes.
17
Advertisement
Table of Contents
