Advertisement
Specifications
Bulletin 6153 and 6154 Industrial Computers with Integrated CRT
Processor/Memory
Processor/Speed (MHz)
Memory Options
System
System Bus Architecture
Available Expansion Slots:
Active Motherboard
Passive Backplane
Serial Ports, Standard
Parallel Ports, Standard
Operating Systems
Network Support
Mass Storage
Internal Drive Bays
Diskette Drive
Hard Disk drives
Operator Input
Keyboard Interface
4-Slot Units
8-Slot Units
12-Slot
Display
Video Controller
CRT Size
Nominal Display Area
Resolution
Dot Pitch
Horizontal Scan Rate
Vertical Scan Rate
Video Bandwidth
Video Inputs
Sync Type
Sync Polarity
486DX4/100 MHz, Pentium/100 MHz,
Pentium/166 MHz
4M (for 486DX4/100 only), 8M, 16M, 32M, 64M
16-bit ISA, 8 slots (active motherboard)
16-bit ISA, 4 or 12 slots (passive backplane)
4 full-length ISA, 3 PCI, 1 shared
2 full-length ISA (4 slot) or 10 full length ISA (12 slot)
2
1
MS DOS, MS Windows 95, MS Windows NT
16-bit Ethernet LAN card
2 (4-slot) or 3 (8 or 12 slot)
3.5 in., 1.44MB
1.0+GB, 1.5+GB, 2.0+GB EIDE
Front Lemo style sealed
Rear 5-pin DIN (Standard AT)
Front 5-pin DIN (Standard AT)
Rear PS2 style
Font/Rear 5-pin DIN (Standard AT)
VGA, 1MB, 2MB, 4MB
20" diagonal
14.0 in. Horizontal x 10.5 in. Vertical
(356 mm x 267 mm)
640 x 480 to 1280 x 1024
0.28 mm
30 kHz to 82 kHz
40 Hz to 80 Hz
150 MHz
RGB Analog, RS-343A (0.7V peak into 75 Ohms =
100% modulation)
Separate Horizontal and Vertical Sync Control. TTL
signal levels.
Horizontal – Negative or positive
Vertical – Negative or positive
Publication 6153-2.0
25
Advertisement
