Advertisement
Installation Manual
The STEALTH 360 is the most reliable
and technically advanced motion-
activated light control ever
produced. This technical manual is
written for electrical professionals
who wish to maximize the
performance and reliability of this
superb sensor.
RAB welcomes your questions or
comments.
Please call 888 722 1000 or email
marketing@rabweb.com.
Thank you for purchasing a RAB sensor.
STL360HBW
STL3FFLED18
STL360H
Specifications:
Switching Capacity:
8 amps
Voltage:
120 volts
Protection Pattern:
180º forward
360º below and to the sides
Time Adjustment:
5 seconds to 12 minutes
Power Consumption:
1 watt
Surge protection:
6000 volts
Cautions:
TURN OFF ALL POWER AT CIRCUIT BREAKER/FUSE PANEL
■ Read entire Installation Manual before proceeding.
■ All wiring should comply with local electrical codes and
requires a qualified electrician.
■ The total lighting load connected to STL360 must not exceed (1000 watts
incandescent, 250 watts fluorescent). To switch more wattage, an electri-
cian can install a relay.
■ Line Carrier Remote Control Systems such as X-10, Leviton or Radio Shack
are incompatible with sensors and may cause false activations.
■ Do not install sensors on a circuit that feeds motor loads such as kitchen
appliances, HVAC equipment, washer/dryer, or garage door openers.
■ Sensor functions best when the direction of expected
movement is across its detection pattern, not towards the sensor.
Mount 6'-10' high for optimum range and detection.
Advertisement
