Advertisement
Sensor Modes
AUTOMATIC MODE
Lights will turn on when there
is movement within the de-
tection zone after dusk.
EVENING TIMER MODE
Keeps lights on for 1-8 hours after dusk. Sensor then reverts to Automatic
Mode until dawn. If you set the Evening Timer Mode during daylight, the
sensor will be prepared to turn on at dusk and remain on for the number of
hours you set. When the sensor is in "Ready for Evening Timer
Mode", the middle LED will
blink 3 times, pause and repeat.
Set the Evening Timer by
flipping the switch that operates
the sensor 3 times within
3 seconds (off-onoff-of off-on).
TEST MODE
The Test Mode will allow you to test the sensor during the day regardless of
the photocell setting. To enter Test Mode, turn time setting to 5 sec on the
unit. Turn power off for 10 secs then back on. There is a 30 second warm-up
period, then the Test Mode starts. During the warm-up, the lights stay on
continiously and LEDs are off. During Test Mode the LEDs remain off. The
sensor will stay in Test Mode until the detection zone is vacated for one
minute.
During the Test Period, the sensor will keep lights on for
5 seconds each time it detects movement in its detection zone. Perform the
walk test and make any adjustments needed. Vacate the detection zone for
one minunte to end Test Mode. Scanning LEDs will appear when test mode
ends. Set back to desired time setting after testing complete.
STEALTH-IN-1114
"On Guard Auto Mode"
LEDs scan continuously back and forth
"Ready for Evening Timer Mode"
Middle LED blinks
EVENING
TIME
TIMER
1
8 HRS
5 SECS
12 MINS
13
MANUAL OVERRIDE MODE
The STL360 has a "protected" Manual Override that requires a double-flip of
the light switch so momentary power problems do not interfere with normal
sensor operation.
By flipping the switch that operates the sensor twice (off-on-off-on) within
2 seconds you will override the sensor to keep lights on continuously until
dawn.
If you set the Manual Override Mode during daylight, the sensor will be
prepared to turn on at dusk and remain on until dawn. This is a handy feature
if you leave home for the day and you want the lights on to greet you when
you return. When the sensor is in " Ready for Manual Override Mode" the
middle LED will be on.
SENS
TO RESUME AUTOMATIC MODE
–
+
Switch OFF the power for at least 10 seconds, then turn it ON again. Sensor
will reset to Automatic Mode after completing the warm-up period.
DAYTIME (24-HOUR) OPERATION OF MANUAL OVERRIDE
If you set Manual Override while set to 24 hour operation, lights will come on
and remain on continously.
Lights will not turn off at dawn.
"Ready for Manual Override Mode"
Middle LED on
14
Advertisement
