Table of Contents
Advertisement
2.
Set Handset
is highlighted. Press Select.
d
3. Scroll
to
Auto Talk
d
u
4. Scroll
or
to
Off
e
5. Press
to return to standby.
8.9
Key beep
When you press a button on the conferencing unit, you will hear a beep. You can switch it
on or off.
1. Press Menu, scroll
2.
Set Handset
is highlighted. Press Select.
d
3. Scroll
to
Key Beep
d
u
4. Scroll
or
to
Off
e
5. Press
to return to standby.
8.10
PABX access code
If the AC1001C is connected to a switchboard, you may need to enter a one-digit access
code in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen. The code
can be up to 4 digits long.
The access code will not be used when you dial the number manually (such as when you
are not dialling from the phonebook). This allows you to make calls to other switchboard
extensions.
1. Press Menu, scroll
2.
Set Handset
is highlighted. Press Select.
d
3. Scroll
to
PABX Access Code
d
u
4. Scroll
or
to Off,
If you select
Set
Code, enter the switchboard access code e.g. 9 then press Save.
e
5. Press
to return to standby.
30
and press Select.
or
On
then press Select.
d
to
Settings
and press Select.
and press Select.
or
On
then press Select.
d
to
Settings
and press Select.
and press Select.
On
or
Set Code
then press Select.
Cordless unit settings
Advertisement
Table of Contents
