Table of Contents
Advertisement
1. Getting started
IMPORTANT
Do not place your AC1001C in the bathroom or other humid areas.
Location
You need to place your AC1001C base within 1.5 metres of the mains power socket and
telephone wall socket so that the cables will reach. The socket-outlet shall be installed near
the equipment and shall be easily accessible.
Make sure that it is at least 1 metre away from other electrical appliances to avoid
interference. Your AC1001C works by sending radio signals between the conferencing
unit and base. The strength of the signal depends on where you place the base. Placing it
as high as possible ensures the best signal.
HANDSET RANGE
The unit has a range of up to 300 metres outdoors when there is a clear line of sight between
the base and conferencing unit. Any obstruction between the base and conferencing unit
will reduce the range significantly. With the base indoors and the conferencing unit either
indoors or outdoors, the range will normally be up to 50 metres. Thick concrete and stone
walls can severely affect the range.
SIGNAL STRENGTH
The
icon on your conferencing unit indicates that you are within range of the base.
When out of range of the base,
Searching
will be displayed and the
icon flashes. If you
are on a call, you will hear a warning beep.
The line will hang up if the conferencing unit moves out of range of the base. Move closer
to the base, the conferencing unit will automatically reconnect to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Use only the power
adaptor and telephone line cord supplied with the product.
Connecting the base
Getting started
7
Advertisement
Table of Contents
