Pro-Form 30514.0 User Manual page 15

Clear-view backlit console treadmill exerciser
Table of Contents

Advertisement

Follow your progress with the display.
4
See step 5 on page 12.
Measure your heart rate if desired.
5
See step 6 on page 13.
Turn on the fan if desired.
6
See step 7 on page 13.
When you are finished exercising, remove the
7
key from the console.
When the program has ended, make sure that
the incline of the treadmill is at the lowest set-
ting. Next, remove the key from the console and
put it in a safe place.Note: If the display remains
lit after the key is removed, the console is in
the "demo" mode. See page 22 and turn off the
demo mode.
When you are finished using the treadmill, switch
the reset/off circuit breaker to the off position and
unplug the power cord.
HOW TO USE A HEART RATE PROGRAM
CAUTION:
lems, or if you are over 60 years of age and
have been inactive, do not use the heart rate
programs. If you are taking medication regu-
larly, consult your physician to find whether the
medication will affect your exercise heart rate.
Insert the key into the console.
1
See HOW TO TURN ON THE POWER on page 12.
Select a heart rate program.
2
To select a
heart rate
program,
press the
Program
Select button
repeatedly.
The display
will show
which program ("P1" or "P2") is selected. When a
heart rate program is selected, the matrix in the
lower part of the display will show the first seven
target heart rate settings of the program.
Enter your age.
3
When a heart rate pro-
gram is selected, the
word "AGE" will appear in
the display and the cur-
rent age setting will begin
to flash. If you have al-
ready entered your age, simply press the Start
button (the program will not start at this time). If
you have not entered your age, press the Speed +
and – buttons to enter your age, and then press
the Start button.
Enter a maximum speed setting.
4
After you have entered
your age, the letters
"SPd" will appear in the
display and the maximum
speed setting of the pro-
gram will begin to flash. If
desired, press the Speed + and – buttons to
change the maximum speed setting. Then, press
the Start button (the program will not start at this
time).
15
If you have heart prob-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

400 gi400 gl

Table of Contents