Turning Your Phone On And Off; Auto Configuring Data Connection Settings - HTC Snap User Manual

To charge the battery
1.
Flip open the sync connector cover at
the right panel of the phone.
2.
Insert the USB connector of the AC
adapter to the sync connector.
3.
Plug in the AC adapter to an electrical
outlet to start charging the battery.
1.4 Starting Up
After installing your SIM card and battery and charging the battery, you can now
power on and start using your phone.

Turning your phone on and off

To turn on the power
Press the END CALL/POWER button.
When you turn on your phone for the first time, the phone installs
settings, launches Connection Setup to auto configure your data connection
settings, and then restarts.
To turn off the power
1.
Press and hold the END CALL/POWER button for a few seconds.
2. Select Yes on the confirmation screen.

Auto configuring data connection settings

The first time you power on your phone, you will see a notification message from
Connection Setup. Connection Setup automatically configures your phone's data
connections, such as 3G/GPRS, WAP, and MMS, so that you do not need to enter the
settings manually.
Getting Started 29
Sync connector
customized