Voice Command - HTC Snap User Manual

11.4 Voice Command

Voice Command lets you call your contacts, open applications, play back music,
and get calendar information just by using your voice. Voice Command only
responds to a set of predefined commands. You cannot create your custom
commands in Voice Command.
When not in a call, press and hold the TALK/SEND button to activate Voice
Command. When Voice Command is activated, the Voice Command icon (
appear at the upper-right corner of the screen.
To call a contact
1.
Hold the phone a few inches away from your mouth.
2.
Press and hold TALK/SEND to activate Voice Command.
3.
In a clear voice, say "Call [Contact Name]. "
4.
Voice Command will confirm with you the contact you want to call.
After the Voice Command confirmation, say "Yes" or "Correct. "
Note
If Voice Command is wrong about the contact to call, say "No" or "Incorrect" to try
again.
5.
The phone calls the contact.
To show the contact card of a contact
This will only show contacts that are saved on the phone.
1.
Hold the phone a few inches away from your mouth.
2.
Press and hold TALK/SEND to activate Voice Command.
3.
In a clear voice, say "Show [Contact Name]" or "Lookup [Contact Name]. "
To request information from your calendar
1.
Hold the phone a few inches away from your mouth.
2.
Press and hold TALK/SEND to activate Voice Command.
3.
In a clear voice, say the information you want to retrieve.
Using Other Applications 145
) will