Table of Contents
Advertisement
General functions
Alarm
.
› You can set two diferent alarm times with the CVR 100
Select in the main menu the option
.
.
ALARM
Now you can select the alarm number one or two
You can activate or deactivate the
/
"
.
.
"
„ON OFF
this function Set the alarm time Select the option „MODE
to select the type of alarm
( . .
).
.
to be used e g
internet radio
Select a memory preset
Select the frequency with which the
( . .
,
,
.).
.
alarm function is to be used e g
daily once
etc
Select the alarm signal volume
Confrm all
".
settings with „SAVE
An alarm icon can now be seen on display and the alarm will go of at the
preset time .
Sleep function
,
"
S
T
› In the main menu select the menu option „SLEEP
to set the sleep timer. Use the „
" and „ "
.
buttons to set in 15 minute stages after which the device is to turn of Confrm your selection
with „ENTER ".
Software upgrade
› You can search for a software upgrade manually and can also select under MENU › System set
,
.
tings › Software update if the device is to automatically search for updates periodically When a
,
.
new software version has been found you will be asked if this is to be downloaded and installed
All user settings are maintained .
Factory default settings
.
› Selecting this option resets all settings to a factory default setting Only the software version
.
and the registration with the internet radio portal are maintained
You can select this option
:
.
under MENU › System settings › Factory reset
27
Chapter 10
General functions
Advertisement
Table of Contents
