Connecting To A Network - Block CVR-100+ Instruction Manual

Connecting to a network

› You will need a network connection for „I nternet radio
› You will need either a router and RJ45 cable or a W-LAN router together with the required pass -
word to establish a connection to your network .
› Your router must have a broadband internet connection for internet radio operation and to
perform software updates .
› When you select and „I nternet radio
.
a network If this is the frst time that a connection has been made or stored networks are not
,
accessible then the „Network Wizard
the following :
MENU › System settings › Network › Network Wizard
Once started you can enter the following information :
(
› W-LAN region select a country select a region from the list
› Network name (select the desired network)
› An encrypted wireless network will require a password .
› Use the navigation buttons or the „CONTROL
.
characters Press either the „ENTER
racter.
"
› Select „BKSP to delete the last character selected
"
› Select „C ANCEL t o cancel your input.
› Select „OK" to confrm the entered code and to try to establish a connection to the selected
network.
› The unit will return to the password entry window if no connection could be made
› Under the menu options MENU › System settings › Network › Network Profle you will not be
able to delete desired networks .
"
or „Music player
"
will start To start the „Network Wizard
/
"
"
button or the „CONTROL
Chapter 6
Connecting to a network
"
or „Music player
" ,
mode your device will try to connect to
.
)
dial to move the cursor through the displayed
"
dial to confrm the selected cha
.
,
" .
operation modes
" ,
manually select
.
-
19