Table of Contents
Advertisement
15.Power failure alarm
Description
Web based platform
manufacturer.
1.Setting APN
1.1 APN standards for Access Point Name and differs from country to country.
For more information about the local APN, inquiry from your local GPRS
network operator.
1.2 Send SMS
password#" via a cell phone and if succeeded, the tracker will return the
message "set APN OK".
E.g. send SMS command "#apn#123456#cmnet#".
Notes: CMNET is the APN content of China Mobile (it has no APN user name
and password).
2.IP and Port setting
"#IP#password#ip address#port
Send SMS
"set ip address and port ok" will be returned by SMS.
E.g, Send SMS command "#IP# password #220.231.203.248#7700#" to the
device (220.231.203.248 is IP,7700 is port, IP is in capital)
If device was removed from car battery, device will end SMS "cut power
alert! +IMEI number+Long&Lat" to the authorized number.
www.gpstky.net
"#apn#password#APN content#APN user name#APN
further details please contact
number#". If succeeded,
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TK309 and is the answer not in the manual?
Questions and answers
App login korta parina
The manual does not provide specific troubleshooting steps for app login issues. However, you can try the following steps based on the setup instructions:
1. Ensure the device is powered on and has a properly inserted and activated SIM card.
2. Confirm the device is connected to the GSM/GPRS network by checking if the three lights stay on after 30 seconds.
3. Verify that the correct IP and APN settings have been configured by sending the following SMS commands:
- `#IP#123456#220.231.203.248#7700#`
- `#apn#123456#APN of operator#APN user name#APN password#`
4. Contact the supplier for platform login details if needed.
If login issues persist, check network connectivity or contact the supplier for further assistance.
This answer is automatically generated