Toshiba AW-G9930S/G1130S Service Manual page 35

Parts
(15) Spring 1) Keep standing the top cover according to
assembly the steps 1) to 5) of (3) Lid switch.
2) Remove the holder 2 from the cabinet
reinforcement plate. While holding the tub
with one hand, remove suspensor rod from
the tub suspension.
(Fig. 11)
(Lifting the tub with one hand will make it
easy to float the suspensor rod.)
* Follow the reverse order of removal.
Note 1 : Care must be given during assembling
Note 2 : Looking from the front side of the
Procedure ( : Notes)
as the suspensor rod on the motor side
differs from the one on the side opposite
the motor. (Fig. 12)
Suspensor Rod Spring Color
Motor side
Opposite side of
the motor
machine, wind the air tube to the left two
turns around the suspensor rod at the
rear left. (counterclockwise) As forgetting
to do this may results in noise from the
air tube striking other components or in
breakage, be sure that the air tube is
wound around the suspensor rod.
Yellow
White
– 34 –
Illustrations
Holder 2
Cabinet
Cabinet
Suspensor
reinforcement
rod
plate
(Fig. 11)
white
Yellow
Front
(Fig. 12)
Cabinet