Toshiba AW-G9930S/G1130S Service Manual page 22

Diagnosis
(
While the power cord is plugged in, the surface and around
The control panel
the control panel are warmed. This is caused by the heat
is warmed.
radiated from the electric parts.
)
(1) Is the lid is opened? (Open the lid, then the indicator
The adequate
amount of
(2) The indication does not appear in the BLANKET course
detergent does
not appear.
~
Is the power source good?
The motor does
not operate.
Check Point
appears.)
or SOAK course.
– 21 –
Remedy
This is not trouble.
This is not trouble.
Refer to 9.3 (2) Failure
"
dignosis with E7 failure
error message (P. 13).
"