Advertisement
To attach a digital display to your DMP, we recommend that you
use the provided HDMI cable for video and audio. However, to
attach any of the recommended NEC display models to your DMP,
you must combine the HDMI cable with the provided
HDMI-to-DVI adapter for video, and use the provided
composite/RCA audio cable for audio. The only exception to this
rule is the NEC MultiSync® LCD4020, which supports HDMI for
both video and audio.
To attach an analog display to your DMP, we recommend that you
use the provided composite/RCA cable for both video and audio.
Step 1 On the back of your DMP chassis, do one of the
following:
• If you will connect your DMP to a digital display that
has an HDMI interface, plug the male end of the
HDMI cable into the HDMI interface on your DMP.
• If you will connect your DMP to one of the
recommended NEC display models that does not have
an HDMI interface, do all of the following:
12
Plug the male end of the HDMI cable into the
–
HDMI interface on your DMP, then connect an
HDMI-to-DVI adapter to the other end of
the HDMI cable.
–
Plug the 3mm jack on the RCA audio cable into
the AUDIO interface on your DMP.
Advertisement
