Frequency Reverse; Talk Around - Retevis RT95 Instruction Manual

C/T: You can hear the calling when receives any matching carrier or CTCSS/DCS or
optional signaling.
4. Press [PUSH] button or [P3] key to store setting and exit.
» This settting is valid only when CTCSS/DCS signaling added.
8.7 Band-width Selection
Select suitable bandwidth in accordance with different local conditions
1. Enter CHAN MENU list, choose No.7 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
WID: band width is 25k(Wide band)
MID: band width is 20k(Middle band)
NAR: band width is 12.5k(Narrow band)
4. Press [PUSH] button or [P3] key to store setting and exit.

8.8 Frequency Reverse

With this function on, the transceiver will be able to communicate with a transceiver in
same network without through a repeater.
1. Enter CHAN MENU list, choose No.8 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
ON: Turn on reverse function
OFF: Turn off reverse function
4. Press [PUSH] button or [P3] key to store setting and exit
» Frequency reverse is turn on, the TX and RX frequency will be exchanged, the
CTCSS or DCS signaling also will be exchanged if existed in current channel.

8.9 Talk Around

1. Enter CHAN MENU list, choose No.9 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
ON: Turn on talk around function
OFF: Turn off talk around function
4. Press PUSH button or P3 key to store setting and exit.
» This function is hide when RTDF function is on.
8.10 Offset Freqeuncy And Direction Setup
1. Enter CHAN MENU list, choose No.10 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting, press [FUNC] key to set the offset
direction.
23
RT95 UHF/VHF Two Way Radio