A. Install The Receiver - ActionTec ScreenBeam Mini 2 Installation Manual

A. Install the receiver

Remove the receiver, power adapter, USB cable, and HDMI
1.
extension cable from the box.
Plug the small male connector of the USB cable to the receiver's
2.
micro USB port labeled Power.
Plug the receiver into an available HDMI port on your HDTV.
3.
Note: If the receiver cannot reach the HDMI port on your TV, use
the provided HDMI extension cable to connect the receiver.
Plug the large male connector of the USB cable to the power
4.
adapter and plug the power adapter into a power outlet.
Turn on your TV and switch the input source until you see the
5.
Ready to Connect screen.
Optional
HDMI Extension Cable
Power
Adapter
Power
Outlet
screenbeam.com | 1