Electrical Safety - Stirling STR-190WH Instruction Manual

General Safety Instructions (Cont.)
Installation
• Heavy: This appliance is heavy, take care when moving it. To avoid back or
other injury, consider a two person lift or mechanical aid when installing it.
• Environment: Install the appliance in an indoor area protected from wind,
rain, water spray or drips. Do not install it next to an oven, grill or other
source of high heat.
• Ventilation: To ensure proper ventilation, the front of the unit must be
completely unobstructed and ventilation openings kept clear of obstructions.
Choose a well ventilated area with temperatures above 16˚C and below 32˚C.
• Refrigerant circuit: Do not damage the refrigerant circuit.
• Level: Install the appliance level in order to ensure it works properly.
• Pipes: Make certain that the pipes are not pinched, kinked or damaged
during installations. Check for leaks after connection.

Electrical safety

• Voltage: Make sure your outlet voltage and circuit frequency correspond to
the voltage stated on the appliance rating label. Plug the appliance into a
properly earthed power outlet with a 15A fuse at the mains.
• Separate circuit: Do not use an adaptor; do not use an extension cord.
We recommend you connect the appliance to a separate circuit serving
only this appliance. This provides the best performance and also prevents
overloading the house wiring circuits that could cause a fire hazard from
overheating. Use a power point that cannot easily be turned off accidentally.
• Power cord: Do not kink or damage the power cord; do not leave it
exposed or dangling. Secure it at the back so no one steps on or places
anything on the cord or against it. Never unplug the unit by pulling the power
cord. Always grip the plug firmly and pull straight out from the power point.
• Damaged cord: Do not use a cord that shows cracks or abrasion damage.
If the power cord is damaged, it must be replaced by the manufacturer or its
service agent. Contact the after sales support line to have it replaced.
• Electrical work: If the installation of this appliance requires any electrical
work, make sure it is carried out by a qualified electrician.
• Disconnect: Unplug the appliance or disconnect power before cleaning
or servicing. Failure to do so can result in electrical shock, injury or death.
Do not connect or disconnect the electric plug when your hands are wet.
Always grip the plug when disconnecting, do not pull on the cord.
AFTER SALES SUPPORT
6
AUS 1300 886 649
MODEL: STR-190WH PRODUCT CODE: 49482 07/2015
info@tempo.org