Haier Z360 User Manual page 45

Once the battery indicators are clipped on the phone, plug the charger
(supplied with the phone, in the box) into the right hand socket at the base of
the phone.
Plug the transformer unit into a main AC power socket with easy access. The
battery symbol indicates the state of charge:
• During charging the 4 charge indicators change; Each bar represents 25%
of charge.
• When all 4 bars are steady the battery is fully charged and you
can disconnect the charger. Normally it takes 2 and a half hours.
• When the battery is charged, remove the connector by pressing the
release button on top of the connector.
Keeping the charger plugged to the mobile when the battery is fully charged doesn't
damage the battery. The only way to turn off the charger is to unplug it, so use an
easily accessible AC power socket.You can connect the charger to an IT supply (Belgium only).
Note: When empty battery is recharging, the battery indicator may appear after 5 mins charging
period.
Conditions
-Do not allow children to use your mobile phone without supervision.
-Do not open or attempt to repair your mobile phone yourself.
-Only use your phone will HAIER batteries, chargers and accessories compatible with your phone.
-Do not allow your phone to be exposed to adverse weather or environmental conditions (dampness, rain,
infiltration, dust, sea air, etc.). The minimum and maximum temperatures recommended by the manufacturer
are between -10°C and +55°C.