Summary of Contents for Dynojet Power Comander III
Page 1
TARTING NSTALLATION OWNLOAD THE OWER OMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE POWERCOMMANDER Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • (800) 992-4993 2004-2007 Kawasaki Mean Streak - PCIII USB EX - 1 i215-411EX...
Page 2
squeeze this connector together to remove The ignition must be turned OFF before installation. Remove the seat. Remove the left side cover. Remove the indicator light cluster assembly. Unbolt the fuel tank. Note: It is not necessary to remove the fuel tank;...
Page 3
Closer view of the PCIII USB EX harness. wires from PCIII USB EX Attach the female PCIII USB EX connector with stock connectors the orange/white wire to the front injector as throttle body shown in Figure E. Attach the male PCIII USB EX connector with the orange wire to the stock injector connector as shown in Figure E.
Page 4
14 Reinstall the fuel tank. 15 Plug the ground wire from the PCIII USB EX into the auxiliary ground from the stock auxiliary ground harness as shown in Figure G. The auxiliary ground can be found lying next to the battery. It has a double lead on a black wire with a yellow tracer.
Need help?
Do you have a question about the Power Comander III and is the answer not in the manual?
Questions and answers