User Interface Setup
You can setup user interface parameters.
1
Press the [FNC] button.
h Popup menu appears.
h
2
Touch [
].
h HOME screen appears.
h
3
Touch [
].
h SETUP screen appears.
h
4
Touch [User Interface].
h User Interface screen appears.
h
5
Set each item as follows.
Steering Remote Controller
■
Sets the desired function in the steering
remote controller. See Learning function of
steering remote (P.44).
Beep
■
Turns the key touch tone on or off.
Default is "ON".
Language Select
■
Selects a language.
Touch Panel Adjust
■
Adjust the sensing position of touch panel.
(P.43)
Clock
■
GPS-SYNC (Default): Synchronizes the clock
time with the GPS.
Manual: Sets the clock manually
Time Zone
■
Select the time zone.
Clock Adjust
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.43)
[DISP Key]
■
Select the source screen displayed when
on the popup menu screen is pressed.
Apps: Switches to the App screen from the
connected iPod touch/iPhone/Android
device or Apple CarPlay screen from the
connected iPhone by pressing the button.
(P.20)
OFF (Default): Displays the control screen of
current source.
Ñ
Adjust the date and time
manually.
1
Touch [Time Zone] in the User Interface
screen.
2
Select the time zone.
3
Touch [Clock Adjust] in the User Interface
screen.
4
Adjust the date, then adjust the time.
5
Touch [Set].
Ñ
Touch panel adjustment
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears.
h
2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Setting Up
].
2
43
English