Page 2
Contents Before Use APPS—Android Auto™/ Apple CarPlay Precautions ..............4 Apple CarPlay Operation ........20 How to read this manual ......... 4 Android Auto™ Operation ........22 Basic Operations Spotify Operation .............23 Functions of the Buttons on the Front Panel ... 5 Tuner Turning on the Unit ...........
Page 3
Setting Up Monitor Screen Setup ..........42 System Setup .............42 User Interface Setup ..........43 Special Setup .............44 Display Setup .............45 AV Setup ..............46 Controlling Audio Speaker/ X’over setup ..........47 Controlling General Audio ........50 Equalizer Control ............50 Volume Offset ............51 Zone Control ..............52 Sound Effect ...............52 Listening Position/ DTA ..........53 Remote control...
• When you purchase optional accessories, to several minutes. Make sure your vehicle check with your JVC dealer to make sure that is outdoors in an open area away from tall they work with your model and in your area.
Basic Operations Basic Operations Functions of the Buttons on the Front Panel NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. Number Name Motion...
Basic Operations Turning on the Unit Initial Settings The method of turning on is different Initial setup depending on the model. Perform this setup when you use this unit first Press the [FNC] button. time. Set each item as follows. h The unit is turned on.
Basic Operations Camera ■ Touch [Security]. Set the parameters for the camera. 1 Touch [Camera]. 2 Set each item and touch [ For detailed operation, see Camera Setup (P.40). DEMO ■ Set the demonstration mode. Default is “ON”. 1 Touch [DEMO] and set ON or OFF. Touch [Finish].
Basic Operations Calendar/clock settings Adjusting the volume To adjust the volume (0 to 40), Press the [FNC] button. Press [+] to increase, and press [–] to decrease. h Popup menu appears. Holding [+] increases the volume continuously to level 15. Touch [ h HOME screen appears.
Basic Operations Touch screen operations HOME screen descriptions To perform operations on the screen, you need Most functions can be performed from the to touch, touch and hold, flick or swipe to HOME screen. select an item, display setting menu screen or to change the page, etc.
Basic Operations Source selection screen Select the playback source descriptions Touch [ You can display all playback sources and From the screen, you can select the options on the source selection screen. following sources and functions. • Switches to the Android Auto/ Apple CarPlay screen from the connected iPod (P.20) touch/iPhone/Android device.*...
Page 11
Basic Operations Put the unit in standby To select the playback source on the HOME screen Touch [ Touch [AV Off]. The 3 items displayed on the source selection screen as the large icons are shown on the HOME screen. You can change items displayed on this area by customizing the source selection screen.
Basic Operations Source control screen Secondary screen descriptions • [ ] [ ] : The Secondary screen changes every time you touch it. You can also change the There are some functions which can be Secondary screen by flicking left or right on operated from most screens.
Basic Operations Popup menu List screen There are some common function keys in the Press the [FNC] button. list screens of most sources. h Popup menu appears. Touch to display the popup menu. Displays list type selection window. The contents of the menu are as follows. •...
Connecting a USB device NOTE • Install the USB device in the place where it will Connect the USB device with the USB not affect safe driving. cable. (P.62) • You cannot connect a USB device via a USB hub and Multi Card Reader.
Page 15
Video screen Track information Displays the information of the current file. Only a file name and a folder name are displayed if there is no tag information. [Function bar • 1] : Searches track/file. For details on search operation, see Search Operation (P.16). •...
Ñ Search Operation Link search You can search a file of same artist/album/ You can search music or video files by the genre as the current track. following operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
iPod/iPhone iPod/iPhone Ñ Connect iPod/iPhone Preparation Wired connection Ñ Connectable iPod/iPhone Preparation The following models can be connected to • Connect an iPod/iPhone with the KS-U62 this unit. (optional accessory) while CarPlay is not connected. Made for • With a CarPlay-capable iPhone, turn off CarPlay •...
iPod/iPhone iPod/iPhone Basic Operation [Function bar • 1] : Searches track/file. For details on search Control screen operation, see Search Operation (P.19). • E] [F] : Searches the previous/next track/ file. Touch and hold to fast forward or fast backward. (It will be cancelled automatically after about 50 seconds.) •...
iPod/iPhone Ñ Search Operation Link search You can search a file of same artist/album/ You can search music files by the following genre/composer as the current track. operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
APPS—Android Auto™/Apple CarPlay APPS—Android Auto™/Apple CarPlay Ñ Operation buttons and Apple CarPlay Operation available Apps on the home CarPlay is a smarter, safer way to use your screen of CarPlay iPhone in the car. CarPlay takes the things You can use the Apps of the connected iPhone. you want to do with iPhone while driving and The items displayed and the language used displays them on the screen of the product.
Page 21
APPS—Android Auto™/Apple CarPlay Ñ Use Siri You can activate Siri. Press the [FNC] button for 1 second. Press for 1 second Talk to Siri. To deactivate Press the [FNC] button. Ñ Switch to the Apple CarPlay screen while listening to another source Press the [FNC] button.
APPS—Android Auto™/Apple CarPlay Ñ Android Auto™ Operation Operation buttons and available Apps on the Android Android Auto enables you to use functions of Auto screen your Android device convenient for driving. You can perform the operations of the Apps of You can easily access route guidance, make the connected Android device.
APPS—Android Auto™/Apple CarPlay Ñ Switch to the Android Auto Spotify Operation screen while listening to You can listen to the Spotify on this unit by another source controlling the application installed in the iPhone or Android. Press the [FNC] button. To enter Spotify source, touch [Spotify] icon in h Popup menu appears.
Page 24
APPS—Android Auto™/Apple CarPlay About Spotify® Content information iPhone or iPod touch Displays the information of the current content being played. • Install the latest version of the Spotify application on your iPhone or iPod touch. (Search for “Spotify” ] / [ ] / [ ] / [ in the Apple App Store to find and install the...
Tuner Tuner Tuner Basic Operation Function bar • [E] [F] : Tunes in a station. The method of Most functions can be controlled from the frequency switching can be changed (see 2 source control screen. in table). To enter Tuner source, touch [TUNER] icon in •...
Tuner Memory Operation Selecting Operation Ñ Ñ Auto memory (FM only) Preset select You can store stations with good reception in You can list and select memorized station. memory automatically. Select a station from the list. Touch [FM]. Touch [SSM]. Ñ...
Tuner Traffic Information (FM only) Tuner Setup You can listen and watch the traffic You can set tuner related parameters. information automatically when a traffic Touch [ bulletin starts. However, this feature requires a Radio Broadcast Data System that includes the TI information.
Page 28
Tuner [Area Setting ■ The tuner channel interval changes depending on the area you use this unit. [Australia] (Default): Select this when using in Australia countries. FM/AM intervals are set to 50 kHz/9 kHz. [US]: Select this when using in North/ Central/South America.
Bluetooth Control Bluetooth Control Ñ Using the Bluetooth function, various About the cell-phone and functions can be used: listening to the audio Bluetooth audio player file, making/receiving a call. This unit conforms to the following Bluetooth specifications: Information for using Bluetooth®...
Bluetooth Control Register from the Bluetooth Step 2: Connection settings • When the HFP profile is supported, Hands Free unit 1 or 2 is automatically selected for connection, proceeding to the next step. It is necessary to register the Bluetooth audio •...
Bluetooth Control Bluetooth Setup Step 3: Phonebook transfer Select if you want to transfer your phonebook data. Press the [FNC] button. This message appears if the device h Popup menu appears. supports PBAP. Touch [ h HOME screen appears. Touch [ The phonebook data transmission starts.
Page 32
Bluetooth Control Ñ Connect the Bluetooth unit NOTE • If a device has been paired, the Bluetooth unit Touch [Select Device] in the Bluetooth cannot be connected from the paired device. SETUP screen. To delete the registered Bluetooth unit Touch [Delete]. Touch the device name you want to connect.
Bluetooth Control Ñ Change the PIN code Playing Bluetooth Audio Device Touch [PIN Code] in the Bluetooth SETUP screen. Most function can be controlled from the h PIN Code Set screen appears. source control screen. To enter Bluetooth source, touch [BT Audio] Input the PIN code.
Bluetooth Control Touch the device name you want to Function panel connect. Touch on the left side of the screen to display the function panel. Touch again to close the panel. • BT DEVICE CHANGE] : Selects the device to connect via Bluetooth audio (A2DP) or APP (SPP).
Bluetooth Control Using Hands-Free Unit ● Select the cell-phone to use When you connect two cell-phones You can use telephone function by connecting 1) Touch [ ] to select the phone the Bluetooth telephone to this unit. you want to use. ●...
Bluetooth Control Call using the preset number Select the phone number from the list. Touch [ Touch the Name or phone number. NOTE • You can set the list to arrange in the order of last name or first name. For details, see Hands-Free Setup (P.39).
Page 37
Bluetooth Control Ñ Receive a call ● Adjust the receiver volume Press the [–] or [+] button. Touch [ ] to answer a phone call or ] to reject an incoming call. ● Mute your voice Touch [ ] to mute or not to mute your voice. ●...
Bluetooth Control Ñ Ñ Phone number preset Phonebook transfer You can register frequently used phone You can transfer the phonebook in your numbers to this unit. Bluetooth smartphone via PBAP. Touch [ Touch [ Touch [Edit]. Touch [ h The phonebook data transmission starts. Phonebook deletion Select where to preset.
Bluetooth Control Hands-Free Setup Auto Response* ■ Sets an automatic response time to pick-up an incoming call. You can perform various setup about OFF (Default): Automatic response is not handsfree function. available. Press the [FNC] button. 1/ 5/ 10/ 15/ 20/ 25/ 30: Set calling ring h Popup menu appears.
Other External Components Other External Components Ñ Camera Setup View Camera Press the [FNC] button. NOTE h Popup menu appears. • To connect a camera, see P.61. Touch [ • To use a rear view camera, a REVERSE lead connection is required. (P.60) h HOME screen appears.
Other External Components External audio/video players— To adjust the parking guidelines AV-IN NOTE • Install the rear view camera in the appropriate position according to the instructions supplied Connect an external component to the with the rear view camera. AV-IN input terminal. (P.61) •...
Setting Up Setting Up Monitor Screen Setup System Setup You can adjust image quality in video, menu NOTE screen, etc. • Each operation in this section can be started from Press the [FNC] button. the multi function menu. h Popup menu appears. Press the [FNC] button.
Setting Up User Interface Setup OFF (Default): Displays the control screen of current source. You can setup user interface parameters. Ñ Adjust the date and time Press the [FNC] button. manually. h Popup menu appears. Touch [Time Zone] in the User Interface Touch [ screen.
Setting Up Ñ Learning function of steering NOTE remote • When changing the function already learned, press and hold the button you want to change This function is available only when your in step 2 and then touch to select the changed vehicle is equipped with the electrical steering function from the function list.
Setting Up Display Setup Software Information ■ Check the software version of this unit. (P.45) Press the [FNC] button. Open Source Licenses ■ h Popup menu appears. Displays the open source licenses. Touch [ Initialize ■ Touch [Initialize] and then touch [Yes] to set h HOME screen appears.
Controlling Audio Controlling Audio You can adjust the various settings such as Speaker/ X’over setup audio balance or subwoofer level. Press the [FNC] button. Press the [FNC] button. h Popup menu appears. h Popup menu appears. Touch [ Touch [ h HOME screen appears.
Controlling Audio Ñ Crossover network setup Speaker ■ You can select a speaker type and its size to You can set a crossover frequency of speakers. get the best sound effects. Touch [X over]. When the speaker type and size are set, the speaker crossover network is set automatically.
Page 49
Controlling Audio Ñ 3 way speaker system setup When Speaker network is set to 3 way: Select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). Press the [FNC] button. h Popup menu appears. Touch [ h HOME screen appears.
Controlling Audio Controlling General Audio Equalizer Control You can adjust equalizer by selecting the Press the [FNC] button. optimized setting for each category. h Popup menu appears. Press the [FNC] button. Touch [ h Popup menu appears. h HOME screen appears. Touch [ Touch [ h HOME screen appears.
Controlling Audio Volume Offset Bass EXT (Bass Extend Settings) ■ When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5 Finely adjust the volume of the current source to minimize the difference in volume between different sources.
Controlling Audio Zone Control [Rear VOL.] ■ Adjusts the rear source volume. You can select different sources for both front NOTE and rear positions in the vehicle. • When the rear speaker sound is switched, the Press the [FNC] button. audio source that is output at the AV OUTPUT terminal is also switched to the same source.
Controlling Audio Bass Boost Touch [Audio]. ■ Sets the amount of bass boost among “OFF”/ h Audio screen appears. “1”/ “2”/ “3”. Touch [Position/DTA]. Loudness ■ Sets the amounts of boost of low and high tones. “OFF”, “Low”, “High” Volume Link EQ ■...
Page 54
Controlling Audio Ñ Front Focus fine adjustment Touch [Level]. Touch [T] or [U] to adjust the sound level Touch [Adjust]. of the selected speaker. Touch [Delay]. Set each item as follows. NOTE • To return to the initial setting of Delay and Level, touch [Initialize] and [YES] in the confirmation Sound Image LR (Front) ■...
This unit can be operated using the remote Removing the battery sheet control. Pull the battery sheet out from the remote For KW-M730BT the remote control is the controller to activate the battery. optional accessory (RM-RK258). # WARNING • Do not ingest the battery, Chemical Burn...
Page 56
Remote control Ñ Direct search mode Function Name Using the remote control, you can jump directly to the desired file, track chapter, etc. Switches to the source to be played. with entering the number corresponding to In hands-free mode, hangs up the phone.
Connection/Installation Connection/Installation Before Installation ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be Before installation of this unit, please note the drained. following precautions. •...
Connection/Installation • Do not press hard on the panel surface when installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. Ñ Installation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤...
Connection/Installation Installing the unit NOTE • Depending on the type of car, reception of the 5 or 6 GPS satellite signals might not be possible with Car Bracket an inside installation. • Please install this GPS antenna in an area away from any antennas that are used with CB radios or satellite televisions.
Connection/Installation Ñ Connecting wires to terminals Fuse (15A) Speaker impedance: 4-8 Ω White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left speaker Green/Black Connect to the vehicle’s Accessory 1 parking brake detection switch harness.
• For how to connect speaker wires to terminals Connect to vehicle’s steering remote harness. other than speaker terminals and Preout Contact your JVC dealer for details. terminals, see Connecting the system and external components (P.61) and Connecting wires to terminals (P.60).
Page 62
Connection/Installation Ñ Ñ Connecting a USB device Connecting an iPod/iPhone Accessory 3 (Gray) (1 m) ● Lightning connector Accessory 2 (Black) (1 m) iPod/iPhone KS-U62 (0.8m) USB device USB (Gray) terminal Accessory 3 (Gray) (1 m) Accessory 2 (Black) (1 m) USB (Black) terminal USB (Gray) terminal USB (Black) terminal...
The dual zone function is enabled. h Turn the power off and on again. If the “Error 07−67” h Set the dual zone function to off. See Zone Control message does not disappear, see your nearest JVC (P.52). dealer. • Cannot select the output destination of the No Device (USB device) subsource in the dual zone.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ About files The following audio, video, and picture files are supported. ■ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG2/4 AAC LC 8 –...
THAT WAS ENCODED BY A CONSUMER ENGAGED trademarks owned by Bluetooth SIG, Inc. and any IN A PERSONAL AND NON-COMMERCIAL ACTIVITY use of such marks by JVC KENWOOD Corporation is AND/OR WAS OBTAINED FROM A VIDEO PROVIDER under license. Other trademarks and trade names are LICENSED TO PROVIDE VC-1 VIDEO.
Page 68
Appendix • libvorbis • libogg Copyright (c) 2002-2008 Xiph.org Foundation Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, Redistribution and use in source and binary forms, with or without modification, are permitted provided with or without modification, are permitted provided that the following conditions are met: that the following conditions are met: –...