Advertisement
EQUIPMENT DEVELOPMENT CO., INC.
MACHINE SAFETY SYMBOL LABEL REFERENCE
This symbol means that the Operator's, owners, instruction and/or manufacturer(s) manuals must be
read and understood before operating or attempting to operate this electrical, gasoline, diesel or
propane powered equipment, failure to do so can result in personal injury and possible death.
This symbol means that proper eye protection must be worn/used during the operation of this equipment. There is
a potential risk of operator eye damage, injury or loss of sight. This also applies to any personnel standing
nearby observing the operation of this equipment.
This symbol means that proper ear protection should be worn/used during the operation of this equipment.
There is a potential risk of operator hearing damage, injury or loss of hearing which will increase based on the
length of exposure. This also applies to any personnel standing nearby observing the operation of this equipment.
This symbol means that proper head protection should be worn/used during the operation of this equipment there
is a potential risk of operator head injury from foreign or loose objects the equipment might come in
contact with during operation. This also applies to any personnel standing nearby or observing the
operation of this equipment.
This symbol means that proper breathing protection or engineering controls must be worn/used during the
operation of this equipment there is a potential risk of operator lung damage. Repeated and/or substantial
inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis. In
addition, to California and some other authorities have listed respirable crystalline silica as a substance known
to cause cancer. When grinding/cutting/drilling such materials, always follow local respiratory precautions.
This also applies to any personnel standing nearby or observing the operation of this equipment.
This symbol denotes the lifting point and means that if lifting of this equipment is necessary use a lifting
device that is designed to accomodate or exceed the weight of this machine. Check the Operator's
manual for specifications. Using a device that is not designed to accomodate or exceed the weight of this
machine could result in damage to the machine and personal injury. Do not lift equipment over people
because death or serious injury could result.
This symbol means do not insert fingers/digits under any edge of the belt cover while the engine/
motor on the machine is running because personal injury and loss of fingers/digits may result.
This GHS pictogram identifies that the chemicals contained present serious health hazards.
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
SECNG -I-1217
E-SPTS-I-0809
MSSLR-0117
Printed in USA
Page 17
©2017
Page 1
Advertisement
